Taidacent Non Contact Fluid Level Sensor High and Low Water Level Switch Water Tank Water Tower Full Automatic Water Pump Sensor Induction Switch (Cable Length 3M, C382 2 Round Probe)

Description: The C382 high and low level controller and two non-contact liquid level detection heads realize the level control function: when the container level is too low, the low level alarm signal from the low level sensor is triggered to trigger the C382 controller to close the relay to start the pump to add liquid When the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the C382 controller to disconnect the relay to automatically stop the pump work, so the cycle works. Thus, the function of automatically controlling the level of the container liquid level is realized, and the container liquid level is kept stable. Features 1.AC110 ~ 250V wide voltage power supply 2. Relay active contact output, suitable for a variety of load control 3. Diversified control, you can control the pump manually or automatically 4. Screw-mounted installation is simple and convenient. Parameters Name C382 High and Low Level Automatic Controller Model classification C382-1P, C382-2P, C382-3P (flat circular induction probe) Input voltage AC110V-250V, 50 / 60Hz Output voltage AC110V-250V, 50 / 60Hz Working current ≤170 mA Working voltage DC12V Power consumption ≤2W Load power resistive load below 1.6KW (overload or for three-phase load requires AC contactor) Inductive load below 1KW (overload or for three-phase load requires AC contactor) Inductive loads are loads with inductive coils, such as motors, electromagnets, solenoid valves, etc. Alarm output 800W (resistive load) normally open / normally closed output Output method 220V active (normally open / normally closed) output Sensor interface voltage DC 12V Working environment temperature -10 ~ 75 ℃, relative humidity ≤80% Installation method Screw mounting Dimensions 115 * 90 * 40 Material PC (fire-resistant material)

• 1.AC110 ~ 250V wide voltage power supply
• 2. Relay active contact output, suitable for a variety of load control
• 3. Diversified control, you can control the pump manually or automatically
• 4. Screw-mounted installation is simple and convenient.