Z-Axis Power Milling Machine, [450 LB Torque ]Power Feed Table Mill,110V, 0-200PRM Adjustable Rotate Speed for Bridgeport and Similar Knee Type Milling Machines

RIEDHOFF X-Axis Power Feed Kit SpecificationsVoltage: 110V, 50/60HzRotate Speed: 0-200 RPMMax Torque: 450 in-lbMax Feed Rate: 650 mm/minMax Return Speed: 850 mm/minControl: ManualDimension: 8"x4.5"x13"Package Size: 11.8"x8.7"x13.8"Gross Weight: 16.5 lbsPackage Content1 x Power FeedX-axis for Milling Machine1 x Copper Gear & 1 x Flat Key Pin2 x Limit Block15 x Round Flat Washer1 x Nominal Diameter4 x Install Screw1 x Limit Switch Box2 x Limit Switch Spring+1 x Handle Spring1 x Bearing Inner Ring1 x Connecting Rod & 1 x Flange

• 【Type Z-Axis】 Z-Axis power feed is made of aluminuml;Power Parameter: 95Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.
• 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this mulitfunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
• 【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
• 【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 5kg/11lbs, Size: 7*4.5*11.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.
• 【WIDE APPLICATION】This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.